Wire Enamels - Enameled Magnet Wire, Enamel Magnet Wire

The wire enamels are known for smaller coefficient of friction, higher mechanical intensity, excellent heat resistant and good solderability. Basically the Enameled wire is a wire coated with a thin layer of insulation to prevent the wire surfaces from being in a short circuit when wound into coils. So whenever electric current passes through the wire or coil magnetic flux is created.

Product	Base	Properties of Magnet Wire	Recommended for wire size (mm dia)	Class of Wire	Cut through for 2 min in °C	Heat Shock at 180°C/30 min	Tandelta Bent Point °C
Bawa 103	Polyester	Economical enamel for fine wires	0.05-0.3	130	265	6d	110-130
Bawa 135	Polyester	Enamel having wide curing range	0.05-1.0	130	240	6d	110-130
Bawa 216	Polyester	High cut through and high processing speed	0.05-1.0	130	280	6d	115-130
Bawa 105	Polyester	Better flexibility and heat shock with high speed	0.315-3.0	130	280	5d	110-135
Bawa 502	Polyester	High processing speed and reddish golden coloured wire	0.05-1.6	130	280	6d	110-125
Bawa KF 105	Polyester	Friendly for environment, enamel without cresol	0.315-1.0	130	280	5d	110-135
Bawa 301	Modified Polyester	Enamel for thicker gauges with better heat shock	0.05-2.0	130	280	4d	115-135
Bawa 303	Modified Polyester	Excellent heat shock	0.05-2.0	155	280	2d	145-165
Bawa 275	THEIC Modified Polyester	High processing speed, high cut through and heat shock	0.05-2.0	155	320	2d	155-170
Bawa 027	Modified Polyester	Good flexibility and adherence	0.2-5.0	130	240	5d	100-115

» Send Bulk Enquiry

Product	Base	Properties of Magnet Wire	Recommended for wire size (mm dia)	Class of Wire	Cut through for 2 min in °C	Heat Shock at 180°C/30 min	Tandelta Bent Point °C
Bawathane 777	Polyurethane	Fast solderability & good cut through	0.08-1.8	155	220	2d	135-155
Bawathane 888	Polyurethane	High cut through and good solderability & resistance to Styrented impregnating resins	0.05-1.8	180	240	1d	175-185

» Send Bulk Enquiry

Product	Base	Properties of Magnet Wire	Recommended for wire size (mm dia)	Class of Wire	Cut through for 2 min in °C	Heat Shock at 200°C/30 min	Tandelta Bent Point °C
Bawamid 743	THEIC Polyesterimide	Excellent heat shock & cut through property with high enamelling speed	0.05-1.6	180	340	2d	185-195
Bawamid 744	THEIC Polyesterimide	Excellent heat shock & cut through property with high enamelling speed	0.5-1.8	180	340	2d	185-210
Bawamid 747	THEIC Polyesterimide	Excellent heat shock & cut through wire resistance to Styrene in varnishes	0.05-1.8	200	350	2d	190-205

» Send Bulk Enquiry

Product	Base	Properties of Magnet Wire	Recommended for wire size (mm dia)	Class of Wire	Cut through for 2 min in °C	Heat Shock at 200°C/30 min	Tandelta Bent Point °C
Bawa FS	Polyesterimide	Good Resistance to all solvents & good heat shock	Upto 60 sq.mm Rect.	155	260	4d	150-170
Bawamid 733	THEIC Polyesterimide	Excellent heat shock & adhesion	1.6-5mm Dia & upto 60sq.mm Rect.	180	320	2d	180-190

» Send Bulk Enquiry

					With Base Bawamid 747
Product	Base	Properties of Magnet Wire	Recommended for wire size (mm dia)	Class of Wire	Cut through for 2 min in °C	Heat Shock at 240°C/30 min	Tandelta Bent Point °C
Bawatherm 1001	Modified Poly-imide	It is a very good replacement of traditional polyamide-imide wire enamel & its cresol soluble and free from NMP so application made easy.	0.05-1.6	220	360	2d	220

» Send Bulk Enquiry

PRODUCT RANGE
Wire Enamels		Impregnating Resins	Insulating Varnishes

Product	Base	Properties of Magnet Wire
Thinner W/E	Cresylic solvents based	Suitable for all Bawa wire enamels
Thinner PW/E	Cresylic solvents based	Suitable for all Bawamid & Bawathane wire enamel