Electric Wire Enamels,Electric Wire Enamels Manufacturer,Electric Wire Enamels Supplier

BAWA 275.38 is THEIC modified Class (155) Polyester wire enamel.
BAWA 275.38 have high processing speed, high cut through & heat shock as compared to standard wire enamels.
BAWA 275.38 is suitable for Die & Felt applications.
BAWA 275.38 is suitable for rectangular conductors.
BAWA 275.38 can be used as base coat for manufacturing dual coating wires with Polyamide-Imide.
BAWA 275.38 specially suitable for wire size 0.05-2.0mm.

PHYSICAL PROPERTIES
Appearance	Golden Coloured Liquid
Solid Content 1g/180⁰C/1h	38 ± 1%
* Viscosity	400-600
Flash Point	40⁰C
Compatibility with thinner	1 : 1

* Viscosity by Viscometer / Brook Field at 23°C in Cps

THERMAL PROPERTIES
Heat Shock 2d/180⁰C/ 30min	OK
Cut Through 320⁰C / 2min	OK

ELECTRICAL PROPERTIES
Break Down Voltage kV	at RT	10.5

MECHANICAL PROPERTIES
Diameter of Bare wire	1.0 mm
Build up of enamel	0.070 mm
Elongation	36%
Flexibility Mandrel Winding (15% pre stretch 1xd)	OK
Jerk Test	OK
Peel Test (nXd )	200-220
Abrasion (Av) (Unidirectional)	12.5N

CHEMICAL PROPERTIES
Solvent Resistance Pencil Hardness
Initial	3h
Std. Solvent	2h

Tan Delta
Bending Point ⁰C (Solid Block)		155-170

RECOMMENDED THINNER		Thinner W/E
PACKING :	Bawa 275 .38 Thinner W/E	205 Kg in mild steel drums. 21 Kg in mild steel drums.
SHELF LIFE	One year from date of manufacturing if stored in sealed container.

This information contained here is best to our knowledge. Company makes no warranty of results and assurance, no obligations or liabilities for the use of any products or process therin. This publication is not to be taken as a license to operate under or recommendation to infringe upon any patents.

PRODUCT RANGE
Wire Enamels		Impregnating Resins	Insulating Varnishes