Electrical Wire Enamel,Electrical Wire Enamel Manufacturer,Electrical Wire Enamel Supplier

BAWA 105.35. is class B (130) polyester wire enamel.
BAWA 105.35 have high processing speed and better heat shock as compared to standard wire enamel
BAWA 105.35 is suitable for Die & Felt applications.
BAWA 105.35 is specially developed for thicker gauzes of wires (0.315-3.0mm).

PHYSICAL PROPERTIES
Appearance	Reddish Brown Coloured Liquid
Solid Content	35 ± 1%
1g/180⁰C/1h
* Viscosity	90-110
Flash Point	40⁰C
Compatibility with thinner	1 : 1

* Viscosity by Ford Cup (B4) at 30⁰C in Sec.

THERMAL PROPERTIES
Heat Shock
5d/180⁰C/ 30min	OK
Cut Through
280⁰C / 2min	OK

ELECTRICAL PROPERTIES
Break Down Voltage kV	at RT	9.5

MECHANICAL PROPERTIES
Diameter of Bare wire	1.0 mm
Build up of enamel	0.070 mm
Elongation	36%
Flexibility Mandrel Winding (15% pre stretch 1xd)	OK
Jerk Test	OK
Peel Test (nXd )	150 - 170
Abrasion (Av) (Unidirectional)	12N

CHEMICAL PROPERTIES
Solvent Resistance
Pencil Hardness
Initial	3h
Std. Solvent	2h

Tan Delta
Bending Point ⁰C(Solid Block)		110-135

RECOMMENDED THINNER		Thinner W/E
PACKING :	Bawa 105 .35 Thinner W/E	205 Kg in mild steel drums. 21 Kg in mild steel drums.
SHELF LIFE	One year from date of manufacturing if stored in sealed container (at room temperature 25 ⁰C).

This information contained here is best to our knowledge. Company makes no warranty of results and assurance, no obligations or liabilities for the use of any products or process therin. This publication is not to be taken as a license to operate under or recommendation to infringe upon any patents.

PRODUCT RANGE
Wire Enamels		Impregnating Resins	Insulating Varnishes